-
Dense 1 1/2 inch
thick pads allow more then enough padding to reduce marring and
pushing down on the machine during application.
-
Professional EP
binding system assures that even after hundreds of washes pads will
not come apart from backing.
-
Dense Multi-Pore
Technology assures the Slowest rate of polish absorption - Allows
for better polish performance.
-
Accu-Pore sizes
Improve operator control by releasing the same amount of
product evenly.
-
Prevents Pad
Skipping - because MPT pads are 1 1/2' inches thick you can press
down without the worry of hitting the backing plate or damaging the
surface CCS pockets reduce surface tension allowing for smoother
buffing performance.
-
Creates Just the
right amount of heat - Acu-Pore construction distributes the heat
created thorough friction evenly throughout the pad to reduce
overheating and burning.
-
OEM Approved
- OEM tests confirm MPT pads out-perform convoluted pad designs.
-
One Pad often times does it all-
Using the right pad with the right product can make all the
difference. MPT pads are made to work with products to deliver
exactly the results your looking for without having to switch from pad
to pad.
-
THICKER THAN EVER-
That's Right this beauty is 40%
thicker then any pad we have ever sold. Having a Thicker pad
is important when using a dual-action polisher because pressure
is required when using the polish in conjunction with the polisher.
Because MPT Pads are Specialized Pads they are constructed of
Dense Multi-Pore Foam that's 1 1/2 inches thick to assure they
will never Bottom Out causing damage or burning paint.
-
Simple & Easy to
Use-- MPT Pads are very simple to use, easy
to understand and perfect for any body shop, detailer or enthusiast.
Where are just 3 pads to choose from CUT, POLISH or FINISH you decide.
-
Notice:
When Used with Medium to heavy Cut compounds or heavy polishes,
CG MPT PADS will cut fast and are aggressive when used at speeds
in excess of 1,000 RPM on a Rotary and 4000 OPM on DA
Dual-Action Polisher
-
Notice: Always start by working
at lower machine speeds. Always Keep check the surface as well as your
work.
-
JUST 3 SIMPLE PADS TO CHOSE FROM
CUT, POLISH, FINISH
