SWIRL
REMOVER CUT PAD- CG-MPT-
Chemical Guys Pads, Multi-Pore
Technology Specializing Foam Polishing Pads
YELLOW-
Easily Removes Medium to Heavy
swirl marks and surface blemishes and marring while restoring gloss.
The best and easiest to use pad to restore and enhance shine and
gloss. Ideal for regular paint paint care with minor surface imperfections.
Swirl and Scratch Removing Cut Pad-
The best polishing pad engineered to easily remove swirl marks, water spots and
fine to medium scratches using the DA or Rotary polisher.
That's Right this beauty is 40% thicker then any pad we have ever
sold. Having a Thicker pad is important when using a dual-action polisher
because pressure is required when using the polish in conjunction with the
polisher. Because MPT Pads are Specialized Pads they are constructed of
Dense Multi-Pore Foam that's 1 1/2 inches thick to assure they will never
Bottom Out causing damage or burning paint.
Innovative “Polishing Pocket” grooves. The Polishing Pocket cut in the face of
the pad allows the pad to be loaded with polish and prevents splatter. As you
apply pressure to the pad, polish in the Polishing Pocket is applied to the
surface.
The foam, pad dimensions and Polishing Pocket all come together to annihilate
swirl marks!
Chemical Guys White MPT Pad can be used with any Polish as well as compounds no
heavier then Medium Cut as well as swirl-remover products like
Scratch and Swirl Remover or
Laser Buff . Ideal for use with a DA Dual-Action Polisher or a Rotary
buffer.
Specialized Multi-Pore construction is superior for applying fine polishes, glazes and waxes. New
Micro-pore Technology foam enables the user to use this pad on a Rotary
or PC device. Micro-Pore foam ensures that every pore exactly the same
size as the one next to it, this way CG-Specializing pads can assure a
perfect finish every time on a PC or Rotary. You will notice when you squeeze our pads
that they are very dense, Micro-Pore pads are dense to keep the product
in the pad for even spreading, cutting, polishing and finishing.
Utilizing Dense Micro-Pore Technology (MPT) also allows CG-Specializing
pads to be used at higher speed setting to deliver a truly perfect
finish by reducing, slinging and waste and increasing coverage area.
The Benefits of
Chemical Guys MPT-
Multi-Pore Technology Specializing Foam Polishing Pads:
-
Dense 1 1/2 inch
thick pads allow more then enough padding to reduce marring and
pushing down on the machine during application.
-
Professional EP
binding system assures that even after hundreds of washes pads will
not come apart from backing.
-
Dense Multi-Pore
Technology assures the Slowest rate of polish absorption - Allows
for better polish performance.
-
Accu-Pore sizes
Improve operator control by releasing the same amount of
product evenly.
-
Prevents Pad
Skipping - because MPT pads are 1 1/2' inches thick you can press
down without the worry of hitting the backing plate or damaging the
surface CCS pockets reduce surface tension allowing for smoother
buffing performance.
-
Creates Just the
right amount of heat - Acu-Pore construction distributes the heat
created thorough friction evenly throughout the pad to reduce
overheating and burning.
-
OEM Approved
- OEM tests confirm MPT pads out-perform convoluted pad designs.
-
One Pad often times does it all-
Using the right pad with the right product can make all the
difference. MPT pads are made to work with products to deliver
exactly the results your looking for without having to switch from pad
to pad.
-
THICKER THAN EVER-
That's Right this beauty is 40%
thicker then any pad we have ever sold. Having a Thicker pad
is important when using a dual-action polisher because pressure
is required when using the polish in conjunction with the polisher.
Because MPT Pads are Specialized Pads they are constructed of
Dense Multi-Pore Foam that's 1 1/2 inches thick to assure they
will never Bottom Out causing damage or burning paint.
-
Simple & Easy to
Use-- MPT Pads are very simple to use, easy
to understand and perfect for any body shop, detailer or enthusiast.
Where are just 3 pads to choose from CUT, POLISH or FINISH you decide.
-
Notice:
When Used with Medium to heavy Cut compounds or heavy polishes,
CG MPT PADS will cut fast and are aggressive when used at speeds
in excess of 1,000 RPM on a Rotary and 4000 OPM on DA
Dual-Action Polisher
-
Notice: Always start by working
at lower machine speeds. Always Keep check the surface as well as your
work.
-
JUST 3 SIMPLE PADS TO CHOSE FROM
CUT, POLISH, FINISH
CLICK ON PAD FOR
MORE INFO REGARDING THAT ITEM
GET THE RIGHT PAD AND BACKING
PLATE TO DO THE JOB RIGHT THE FIRST TIME. CHEMICAL GUYS PADS ARE 1 and
1/2 thick so they never bottom-out and offer superior buffing over and
over again.
